Tiny tugboat part 4

I have made some patches and they need to be applied from the back and I could not get behind so the solution was to apply them from the outside.
The reason for the holes is I got the shape wrong and had to modify it on the run.
This next photo shows the patch to be placed in from the outside and this is how it would look viewed from the inside.

 

The next photo shows how the patches are held into position.

The purple is a rubber band to hold the patch in place.

The above photo shows one patch in place and the second going in.

After the patches dried a coat of filler was applied.

 

Just a few different angles. 

The bow wit a bit of filler added.