tiny tug part 13

 The stern view of the glassed hull.

 More of the same.

 Looking up at the stern from what will be the top.

Looking up at the front from what will be the top. My Mate Russel came over and we laid up the entire boat in three layers in four hours. The resin caused ripples in the putty and the whole thing will have to be sanded again to get a good finish for the mould but all is not lost as this will be the first boat from the mould.

little tugboats part12

The photos speak for themselves. 

These are some pictures of my paddle tug

 Its about a metre long. Has 24 different timbers in it and was started in 1988.

tug boat part12

 More sanding takes time and is getting closer.

 Couldn't help myself  for seven dollars both compressor and angle grinder. Both work. I need a bigger shed.

little tugboat part 11

The above shows all the planking done and more filler applied and sanded. 

Still a few blemishes to get done.
The stern showing the lines this is how the old timers used to make there boats. No plans just a half model.  If it looked right it was right. The shadows give the wrong impression of the lines

tiny tug boat part10

Finished the planking and am putting up and fairing the hull.

Tiny tugboat part9

This shows the water coming down Just as well That I moved the tug into the shed

 More work one to go on this side.